VPN Router - Gateways Setup

Ruth Petty -

Sabai VPN Router - Gateways Setup Instructions


Terms to know:

Default (D)

Sets all devices on the router to the current active state (so, if VPN is turned on, everything uses VPN. If VPN is turned off, everything goes out local)

 photo image_006_zpsu3pqg9qt.png

Local (L)

Assigns local internet to specified devices

 photo image_007_zpsdelw6wpi.png

VPN (V)

Assigns VPN internet to the specified devices

 photo image_008_zpsalbf19sy.png

Accelerator (A)

Assigns vpn accelerator internet and is only available if you have purchased this device separately from our website

 photo image_002_zps5po5ojnf.png

Device Setup

Please make sure you are connected to the Sabai router before attempting setup. Connect using either wire or wireless.

Open a web browser

 

Enter 192.168.199.1 in the address bar and login to your Sabai VPN Router. Default login is admin and sabaipass123.

 

Click on Network

 

Click on gateways in the menu bar to the left, under network

  photo image_009_zps3u6oezth.png

There you will see all of your devices currently connected to the router

 
 photo image_012_zpsuiww5hej.png
 

Start by assigning your default setting. Any device added to your network will automatically be put on the default setting

 
 photo image_005_zps5j9uixdb.png

For individual device settings, click on the radio button next to that device, in the gateway column of your choosing

 
 photo image_zpsdijtmvcv.png
 

Click save

 
 photo image_004_zps4f4tncnp.png

Any device in this list can be managed this way.

 
 photo image_004_zps4f4tncnp.png

For assistance with setup please contact us at support@sabaitechnology.com.

Our office hours are Monday through Friday, 8:00am to 6:00pm EDT/EST.


All done! Enjoy!

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.